mixture screw tap

[catbed]

does anybody know the thread size and pitch for the mixture adjustment screw? on a CV carb.

[catbed]

bumpity bump.

[Road_Clam]

does anybody know the thread size and pitch for the mixture adjustment screw? on a CV carb.

You won't find one. I already tried. It's something along the line of an M7X.5 pitch. Nobody makes a tap for this oddball thread....

[t3rmin]

It's M6 x 0.5 (fine) as I recall. I had a thread on it probably a year ago if you can find it. I think I found a suitable tap at McMaster-Carr (mcmaster.com) or J&L (jlindustrial.com). That tap saved a carb for me.

*EDIT* Here's that old thread: http://www.thegsresources.com/_forum...ad.php?t=98188

[catbed]

bingo! found one mcmaster carr. 22 bucks:shock:

[t3rmin]

J&L was cheaper I think...

[catbed]

i couldnt find it on j&l

[REBRIDER]

M6X.5 tap

MSC Industrial, cat.#09037151 ,$4.32 . They have an online catalog