Pingel Tap, what about vacuum pipe?

[Headphase]

1980 GS750L , fitting a pingel on to replace that mad original fuel tap.

I know loads of people use the pingel, but what do you do with the vacuum pipe off of the original tap, just put a screw in the end of it or something to blank it off?

Thanks

[earlfor]

Put a short length of vacuum hose on the carb vacuum port hose fitting and plug the end of the hose with a small bolt or screw that fits tightly.

Earl

1980 GS750L , fitting a pingel on to replace that mad original fuel tap.

I know loads of people use the pingel, but what do you do with the vacuum pipe off of the original tap, just put a screw in the end of it or something to blank it off?

Thanks

[n1elkyfan]

the other thing you can do is go to your local auto parts store and you can buy little vacuum plugs. That what I did for my 79 750

[Headphase]

thanks, thats what I'd figured, but thought it best to check with folks who've been there.