8v vs 16v pipe fitment

[TheCafeKid]

I am speaking to a fellow GSR about purchase of a VH pipe for use on the cafe (one that i dont mind painting) and its coming off his 1100E, and going on my 77 750B. Is this going to work? I was pretty sure the header port spacing on all the GSs is pretty close to the same, just want to make sure?

Thanks
TCK

[Guest]

Part 25426 fits the following machines:
1980 Suzuki GS1100E
1981 Suzuki GS1100E
1982 Suzuki GS1100E
1983 Suzuki GS1100E
1983 Suzuki GS1100ES
1980 Suzuki GS1100L
1980 Suzuki GS750E
1981 Suzuki GS750E
1982 Suzuki GS750E
1980 Suzuki GS750L
1981 Suzuki GS750L
1982 Suzuki GS750T
1983 Suzuki GS750T

[TheCafeKid]

All 16v bikes Bummer. Thought they might fit. Ive managed to get stock 16v pipes to fit an 8v motor. Ahh well... back to the drawing board

[Guest]

Oh I'm sure you could MAKE them fit! :-D

[TheCafeKid]

I dont wanna MAKE them fit...might never get them off! LOL. I guess if i want to have a black VH, ima have to paint the one i have

[earlfor]

I dont think it will fit. I swapped a 79 750 pipe onto an 81 750 engine and it fit and then swapped the 81 750 pipe onto an 1100 and that fit because the 1100 exhaust ports were slightly larger than 750 ports. Going the other way (1100 pipe to a 750 engine), the pipe will be (guess) about 1/16" larger diameter than the exhaust port on the 750. It may be do-able with some grinding, but I would take some measurements before deciding to try.

Earl

I am speaking to a fellow GSR about purchase of a VH pipe for use on the cafe (one that i dont mind painting) and its coming off his 1100E, and going on my 77 750B. Is this going to work? I was pretty sure the header port spacing on all the GSs is pretty close to the same, just want to make sure?

Thanks
TCK