would 1000 and 1100 exhausts' interchange?

[beachbum3478]

i have an 82 gs1100gl. im having trouble finding an aftermarket 4-2 exhaust for shaftie models. sooo, iv noticed on ebay that there alot of mac mufflers and full exhaust for gs1000's up to 1980. i was just wondering for future refrence if an exhaust or mufflers with the y-split off a gs1000 would fit my gs1100? or any other bikes exhaust. and theres no way i want a 4-1, i love the look and sound of a 4-2 on a 8 valve.

heres a couple ebay links for the exhaust or mufflers iv been looking at.

http://cgi.ebay.com/ebaymotors/Suzuki-GS1000-gs-1000-exhaust-pipe-system-1978-80_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247QQcategoryZ35596QQihZ020QQitemZ300214472424QQrdZ1QQsspagenameZWD1V

http://cgi.ebay.com/ebaymotors/MAC-Suzuki-GS-1000-thru-1980-Flare-Tip-Muffler_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247QQcategoryZ35596QQihZ025QQitemZ380023189358QQrdZ1QQsspagenameZWD1V

http://cgi.ebay.com/ebaymotors/Suzuki-GS-GS1000-New-Slash-Cut-Mufflers-1978-79-IBK_W0QQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247QQcategoryZ35581QQihZ006QQitemZ160184103366QQrdZ1QQsspagenameZWD1V

[twr1776]

The stock pipes for the GL's were the same pipe for the 81 1000GLX & 831100GLD shaft models. I am not sure about the pre 81 models.

[beachbum3478]

all im really worried about is if the exhaust ports off the cylinder head are the same size and width apart for the the headers to interchange. i can deal with making new brackets for the mufflers to hang on.

[GS1000G]

Does anyone know if exhaust from an '80 GS1100LT will fit on an '80 GS1000G. I figure I will have to modify the muffler mounting bracket which is no big deal, but am more worried about bolting up to the head and ground/frame clearance. Thanks.


Andrew

[Steve]

Does anyone know if exhaust from an '80 GS1100LT will fit on an '80 GS1000G.

I am under the impression that the pipes for the 16-valve engines and the 8-valve engines are not interchangeable.

.

[GS1000G]

I am under the impression that the pipes for the 16-valve engines and the 8-valve engines are not interchangeable.

.

OK. Thanks for the information!

[kochic]

I have a Vance & Hines Propipe on my gs1000.They list the same part number for both 8 and 16 valves.
Marc

[chef1366]

I put a header that was on a 1000 eight valve onto a sixteen valve 1100.
It fit.
This was a sidewinder race header though.