i have CV carbs on my 82 gs1100g.. and i got looking at some carb pics today, and noticed that the cv carbs in the pics had air screws... mine are solid, no screw, just a peice of brass. is that normal?
-
-
Should be a screw under a small round aluminum cover. -
huh mebby it is a cover.. i didn't poke it too much.Comment
-
American carbs from 1980 up are sealed.
I got a set for my 83 1100E from Canada that have open exposed air screws. (up on top easy to get to!)Comment
-
lots of info if you search. drill small hole into the plug ONLY drill about 1/8th-3/16 inch into the plug Pull plug out with a self tapping screwComment
i only read the first 5 or so hits off search 
Comment