One neet trick to remone a frozen piston is to remove the bleed fitting and screw in a grease fitting( they are the same thread) then using a grease gun you can pump the piston out. You will produce a couple of tons pressure and there is no safety problems as would be if you used air.:-D
Front Brake / MC piston Stuck!!!!!!
Collapse
X
-
White
frozen piston in caliber
One neet trick to remone a frozen piston is to remove the bleed fitting and screw in a grease fitting( they are the same thread) then using a grease gun you can pump the piston out. You will produce a couple of tons pressure and there is no safety problems as would be if you used air.:-D
Comment