Announcement
Collapse
No announcement yet.
Need source for tail pipe/muffler
Collapse
X
-
justinmcgiver
Need source for tail pipe/muffler
The rear right muffler on my '79 GS1000 is munged up. I don't want to replace the whole system since the bike runs too darn good and I don't feel like messing with jetting. It is perfect with the stock exhaust. Is there a source for this? Does anyone make a pattern part copy? I've been watching ebay but have been surprised at how little there is for the GS compared to my CB.Tags: None
-
SqDancerLynn1
They do come up on Ebay sometimes,. Another proven alternative is some Hardly mufflers & a little welding.
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 36016
- Torrance, CA
How about grafting on some replica Dunstall mufflers? http://motors.shop.ebay.com/items/du...Q_nkwZdunstallEd
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
onchiman
-
justinmcgiver
-
onchiman
No, I don't know Fred. I ride through Placid quite a bit. I was there the other day at T Hoffman automotive getting my bike inspected. The River road and Notch is a nice little ride.
Comment
-
gus33
-
gus33
If you call your local motorcycle yard they will probably have them. They are universal so are popular with several makes.
Comment
-
justinmcgiver
So would you actually cut the old pipe off behind the collector and then clamp the new one to that?
Comment
-
Here's link a to someone who has done it on a GS1000. If you need it to be stock, don't want spend a bunch of money and like the balanced look of 2 mufflers this could be the way to go. They look pretty good too.
'84 GS750EF (Oct 2015 BOM) '79 GS1000N (June 2007 BOM)
Comment
-
justinmcgiver
Thanks for that...I thin that is the route I want to go. I like the 4 into 2 look for this bike. Prob use the dunstall reps. Unfortunately I don't have a welder or any welding experience. Wondering if there is a non welded alternative.
Comment
Comment