STARTER CLUTCH

[Anonymous]

WAS WONDERING IF THERE'S A WAY TO GET THE STATOR ROTOR OFF WITHOUT USING A SPECIAL SUZUKI WRENCH. THANKS FOR ANY SHORT CUTS.

[redliner1973]

I am sure that Dom Scotto has something to say about this one!!! :twisted:

[Anonymous]

I am sure that Dom Scotto has something to say about this one!!! :twisted:

Buy the tool

http://www.denniskirk.com/powervendor/lists/partlist.asp?serverid=nlStreet&type=19&subtype=enginetools&search=search&SD2=Flywheel+Puller+

It actually as much cheaper from the Suzuki dealer. No shipping charges and they can call and check stock for you
Dennis Kirk only updates thier in stock flags once a week I ordered one from them and then got a back order notice even though it showed in stock. I cancelled the order and went to the suzuki dealer where i expected to pay more. I was wrong.

[redliner1973]

BTW Scotty, How much was it?? :twisted:

[Anonymous]

BTW Scotty, How much was it?? :twisted:

if you get it from aftermarket it is about 165 dollars for the assembly. Suzuki goes nort have the assembly any more . I ammgoing to murdoch racing in safety harbor florida to look for parts because i need the rotor also another 250 dollars new.
the clutch assembly # 12600-49850

http://houseofmotorcycles.bikebandit.com/partsbandit/oem_schematic.asp?schem_dept_id=131096?ion_dept_id=1?ion_dept_name=OEM++%28Stock%29+Parts&dept_type_id=2&model_dept_year=1983&model_dept_mfr=Suzuki&model_dept_id=109182&model_dept_name=GS1100%28D%29

the rotor # 31402-49410

http://houseofmotorcycles.bikebandit.com/partsbandit/oem_schematic.asp?schem_dept_id=131290?ion_dept_id=1?ion_dept_name=OEM++%28Stock%29+Parts&dept_type_id=2&model_dept_year=1983&model_dept_mfr=Suzuki&model_dept_id=109182&model_dept_name=GS1100%28D%29

[redliner1973]

That Hurts!!!! :twisted:

[kz]

Buy the tool!

[Anonymous]

the tool was only 27 dollars US or so. for the 30mm thread

[cbxchris]

Hey slowpoke...Jay`s waiting on you......got a pipe and some other stuff from him today 8)

[Anonymous]

TOOL FOR PULLING FLYWHEEL TO REPLACE STARTER CLUTCH

THANKS FOR THE INFO. I CALLED A LOCAL SUZUKI DEALERTHE NEXT DAY AND THEY WOULD CHARGE 5.00 TO REMOVE THE FLYWHEEL. DENNIS KIRK IS EXPECTING THE TOOL SOON. THANKS AGAIN.

HARVEY

[Hap Call]

Re: TOOL FOR PULLING FLYWHEEL TO REPLACE STARTER CLUTCH

THANKS FOR THE INFO. I CALLED A LOCAL SUZUKI DEALERTHE NEXT DAY AND THEY WOULD CHARGE 5.00 TO REMOVE THE FLYWHEEL. DENNIS KIRK IS EXPECTING THE TOOL SOON. THANKS AGAIN.

HARVEY

I wish my Suzuki dealer were that cheap! Mine excels in overcharging! I took a chain in to get it riveted and when I got the bill there was a charge for "Shop Supplies"! I told them that I supplied the chain, the masterlink, and the lube...what the hell was this "Shop supplies"? He removed it saying that they put it on all the bills...what a rip!!!

Hap

[Anonymous]

Hey slowpoke...Jay`s waiting on you......got a pipe and some other stuff from him today 8)

Jay had all the stuff i needed and i also picked up a dyna 2000 shift minder (the controll and the light)--while i was at it i found a manual chain adjuster. next is thern billett ((someday ill remember how to spell that word)) outer clutch hub. i might even get that modified air box and semi flatslides on one of these weeks. 8O

[Anonymous]

starter clutch fixed

WELL I THOUGHT I'D LET YALL KNOW WHAT WAS MATTER WITH MY STARTER CLUTCH. THE CLUTCH WAS FINE BUT THE 3 ALLEN HEAD SCREWS WERE BROKE, I MEAN SHEARED SMOOTH OFF. EVER SINCE I'VE HAD THE BIKE IT'S HAD A RATTLING IN THAT SIDE COVER AT IDLE. SO NOW I HAVE A STARTER CLUTCH & ROTOR THAT I DONT NEED (THEIR USED AND WAS'NT THAT MUCH.) SO IF YOU HERE RATTLING IN THAT LEFT SIDE COVER IT COULD 1 OR 2 BROKE SCREWS. WHEN THE THIRD ONE GOES SO DOES STARTING YOUR BIKE.


HARVEY
82 1100 GL

[Anonymous]

Re: starter clutch fixed

WELL I THOUGHT I'D LET YALL KNOW WHAT WAS MATTER WITH MY STARTER CLUTCH. THE CLUTCH WAS FINE BUT THE 3 ALLEN HEAD SCREWS WERE BROKE, I MEAN SHEARED SMOOTH OFF. EVER SINCE I'VE HAD THE BIKE IT'S HAD A RATTLING IN THAT SIDE COVER AT IDLE. SO NOW I HAVE A STARTER CLUTCH & ROTOR THAT I DONT NEED (THEIR USED AND WAS'NT THAT MUCH.) SO IF YOU HERE RATTLING IN THAT LEFT SIDE COVER IT COULD 1 OR 2 BROKE SCREWS. WHEN THE THIRD ONE GOES SO DOES STARTING YOUR BIKE.


HARVEY
82 1100 GL

That is exactly what happened to mine--My replacement setup has the screws tac welded in place.