dash and headlight all light up but no start>?

[ddz]

hey guys n gals<
I was out riding my gs(1980 1000g)when all of a sudden she cuts of .I pull to the side or the road & all the lights are working but the ignition button does nothing!If i jump out the solenoid she'll turn over fine , but not start!She wont even bump start.she's in real good shape (thanks to GSR). New stator,r/r, dyna ign,clean carbs,valves adjusted,new battery. Was running MINT before this happened.Im guessing i'll have to start with the "meter" checking the ign. switch & kill switch & maybe power to the coils. I also cut the wires to the clutch saftey switch & put them together ( bypassing it).
Anything anyone else can think to check would be a help.
Ps. the "run" switch looked clean also (opened that up to)
Thanks
Vinny

[Zook]

Sidestand switch.

[Dave8338]

Clutch safety switch. Kill switch set to run? (hey I've seen it happen)

[Zook]

He eliminated the clutch switch.
Did the wires come apart? If not, I still put my $ on the sidestand.

[seuadr]

might sound silly, but did you check your fuses? the other day i had my ignition fuse go out.. the starter button didn't work and everything else seemed fine.

also, if you've done the coil relay mod, check the inline fuse.

[ddz]

so,....i have no side stand switch. Im getting power to the kill switch but none to the start button? I took apart the kill switch & cleaned the contacts.I also took apart the ign switch & cleaned that too. im going to pull the fuse box & check that out next. im also not getting power to the coils ( maybe the coil relay mod in my future too)
anyway ..back to the garage!
Wish me luck!
Vinny

[Dave8338]

Sounds like it is in the ignition circuit, somewhere. When the switch is on, there should be power to the coils as well.