quick, but intimate rear m/c question....

[Guest]

ok, guys,

i am putting my rear m/c back together on my 78 gs 750. it is the m/c with the separate reservoir attached by a short hose. my question is this:

is there a washer between the nipple that the rubber hose hooks up to, and the m/c body? i cant remember....stupid, i know, i should have taken some pics. i have this random nylon washer laying around, but is isnt really the "right" size, and i dont think it is right. rrrr.....so stupid.....all these little parts laying around my garage.....didnt i learn anything from my carb rebuild????

thanks!! oh, and the fische/my clymer manual does not show this tiny detail....

greg

[Shaughn]

EDITED, COPPER WASHER IS VISIBLE. TYPO ON MY PART, SORRY

Hi Greg,

If by nipple, you mean the banjo bolt on the pressure line, yes, there should be a copper washer on both sides of the hose, bolt head side and M/C side.
If you mean the rubber hose from the reservoir to the M/C, then here is what mine looks like, there is a washer visible: (be kind, she's in recovery from her PO)

[almarconi]

The rear MC on my 750L has a washer under the nipple.

[Shaughn]

The rear MC on my 750L has a washer under the nipple.

Yeah Al, That was a typo. Here's a less ambiguous pic

[Guest]

thats the one! perfect, thanks, guys!!!

now, where'd i put that little bastard.....can i blame the dog for this one????

greg

[Suzuki mad]

Beware what you blame the dog for.....

Suzuki mad























Reason:- It normally comes back and bites.