Carb Bolt Kit

[Riding Again]

I was wondering if anyone knew of a allen head bolt kit for the carbs?

[Guest]

Look and see if you have a bolt house or something similar. Bring in the old POS phillip screws and match them up with allen S/S.

[Steve]

Or you can try this eBay store.

Just type "GS850 carb" in the store search window.

.

[Nessism]

I don't like hex key screws due to difficulty in install/removal. I bought new phillips head screws from the local hardware store. On my 850 I wanted the bike to look stock so I bought yellow chromate (I think) plated screws from Z1 Enterprises.

http://z1enterprises.com/catalog.aspx?pid=GS850GT-1980-CF0

[doctorgonzo]

Or you can try this eBay store.

Just type "GS850 carb" in the store search window.

.

That's the set I have, very complete, a good deal.

[Shaughn]

That kits looks good, just ordered.

Either of you order his total engine bolt kit? I bought the z1 kit for a little
bit less, but got no washers or instructions. Easy enough to figure out, I think, if one already had the engine apart, but doing it cover by cover I'm sure I'll end up with one missing/one mis-fit. Half done now anyway, but if his kit is good, I might add it to the xmas list just to have more SS hardware on hand.

[doctorgonzo]

That kits looks good, just ordered.

Either of you order his total engine bolt kit? I bought the z1 kit for a little
bit less, but got no washers or instructions. Easy enough to figure out, I think, if one already had the engine apart, but doing it cover by cover I'm sure I'll end up with one missing/one mis-fit. Half done now anyway, but if his kit is good, I might add it to the xmas list just to have more SS hardware on hand.

Yep, I have the engine kit from the same guys, also very complete.

[xDownSetx]

I bought their GS1100 kit for my bike, was missing 5 bolts total. They shipped the first one I found for the stator cover but the rest would have taken too long so I didn't bother msging them.

[Nessism]

I've used Burk's Motorsport for stainless bolt kits. These are the guys Z1 Enterprises uses.

http://www.westcoastmc.com/store/