GS1100E / GS1000E Rear Tire Size

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • srsupertrap
    Forum Sage
    Past Site Supporter
    • Oct 2007
    • 2208
    • Erie, CO.

    #1

    GS1100E / GS1000E Rear Tire Size

    What size rear tire are you GS1000E 2V / GS1100E 4V owners putting on your bikes? The original rear tire on my 1000E was a IRC 4.50 V17 and I am pretty sure the GS1100 uses the same rear wheel. I have replaced the rear tire with numerous 130/90V-17 rear tires while running 100/90V-19's front with not ill handling effects.

    I was reviewing the attached the Dunlops tire conversion link and looks like I was subscribing to the misguided notion that bigger is always better, according to Dunlop I should be using a 120/90V-17 rear next time around? Is the 2.15" rear wheel to skinney for a 130/90 tire?

    Steve

    1979 GS1000E (45 Yrs), 1981 GPz550 (11 Yrs)
  • BassCliff

    #2
    Hi Mr. srsupertrap,

    Are you sure about your rear wheel size? I use a 130/90 on my bike. No worries. I think most of us here with a 750cc or larger bike do.


    Thank you for your indulgence,

    BassCliff

    Comment

    • srsupertrap
      Forum Sage
      Past Site Supporter
      • Oct 2007
      • 2208
      • Erie, CO.

      #3
      I would have to look at the wheel because I am going on memory but according to the Dunlop cross reference chart a 4.50" equals a 120/90.
      Steve

      1979 GS1000E (45 Yrs), 1981 GPz550 (11 Yrs)

      Comment

      • Steve
        GS Whisperer
        • Jun 2005
        • 35925
        • southwest oHIo

        #4
        I am guessing that you are remembering the wheel size incorrectly.

        Your front wheel should be 2.15 inches, the rear is probably 2.50 or 3.00 inches.

        .
        sigpic
        mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
        hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
        #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
        #2 son: 1980 GS1000G
        Family Portrait
        Siblings and Spouses
        Mom's first ride
        Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
        (Click on my username in the upper-left corner for e-mail info.)

        Comment

        • 8trackmind

          #5
          Originally posted by srsupertrap
          I would have to look at the wheel because I am going on memory but according to the Dunlop cross reference chart a 4.50" equals a 120/90.
          The 17" rear rim you have is a 2.50. The 18" rear rims are 2.15.
          I'm running an 18" mag on the rear with a 120/90.
          Last edited by Guest; 08-18-2008, 05:15 PM.

          Comment

          • 8trackmind

            #6
            Originally posted by Steve
            Your front wheel should be 2.15 inches, the rear is probably 2.50 or 3.00 inches.

            .
            1.85 on the front.

            Comment

            • Steve
              GS Whisperer
              • Jun 2005
              • 35925
              • southwest oHIo

              #7
              Originally posted by 8trackmind
              1.85 on the front.
              I guess it's the newer ones that got the 2.15s.
              sigpic
              mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
              hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
              #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
              #2 son: 1980 GS1000G
              Family Portrait
              Siblings and Spouses
              Mom's first ride
              Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
              (Click on my username in the upper-left corner for e-mail info.)

              Comment

              Working...