One of mine was around .05, real noisy. I use a metal tire iron for bicycle tires to press the valve, works great,
Wondering about gs's when new
Collapse
X
-
I have found the two inboard cylinder exhaust valves to be receding into the head and the intake side (all four) to actually need larger shims, probably due to deposits on the seat. I have shimmed my engine twice so far and recorded the change each time. Same valves needing adjusting too.
One of mine was around .05, real noisy. I use a metal tire iron for bicycle tires to press the valve, works great,1981 GS650G , all the bike you need
1980 GS1000G Power corrupts, and absolute power corrupts absolutely
Comment