Raising cv carb needles rich or lean?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • miket

    #1

    Raising cv carb needles rich or lean?

    Raising carb needles richens or leans out?
  • Guest

    #2
    raising the needle lifts it up from sitting in the needle jet seat thus letting MORE fuel through

    Comment

    • tkent02
      Forum LongTimer
      Past Site Supporter
      • Jan 2006
      • 35571
      • Near South Park

      #3
      Originally posted by psyguy
      raising the needle lifts it up from sitting in the needle jet seat thus letting MORE fuel through
      and is done by using a thinner washer above the clip.
      http://img.photobucket.com/albums/v5...tatesMap-1.jpg

      Life is too short to ride an L.

      Comment

      • Guest

        #4
        Originally posted by tkent02
        and is done by using a thinner washer above the clip.
        unless you live outside the usa in which case your needle is already grooved and has a circlip adjustment. easy

        Comment

        • tkent02
          Forum LongTimer
          Past Site Supporter
          • Jan 2006
          • 35571
          • Near South Park

          #5
          Originally posted by psyguy
          unless you live outside the usa in which case your needle is already grooved and has a circlip adjustment. easy
          I make my own grooves. :-)
          http://img.photobucket.com/albums/v5...tatesMap-1.jpg

          Life is too short to ride an L.

          Comment

          Working...