.png "Powered by vBulletin")
1.) Do I have to drain the engine oil before pulling the old seal out ?
2.) Which side of the seal goes into the block ?
2.) Which side of the seal goes into the block ?
-
-
You can leave the oil alone. Seal is installed with the closed end outward.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
Thanks Nessism !!
That's what I kind of figured. Thank you Sir.Comment
-
Just make sure you have the bike leaned over to the RIGHT side instead of left on the sidestand! Also, make sure you GREASE the new seal inside & outside before installing so it won't bind or tear. Ray.Originally posted by Nessism View PostComment
Comment