Exhaust Swap?

[car99r]

Anyone know if the exhaust off a 1980 GS750L will fit on a 1980 GS550L? I have a chance to get one in a lot better condition than mine but not sure if it will line up with mounts and head. Looks the same but part numbers are different.

[groundshock]

Pretty sure that it will not fit, as the head designs are much different, but I'm not 100% sure. I'm sure someone with more experience will chime in.

I know the MAC on my old 80 750L would not have worked on my dad's 82 650L, if that helps at all.

[car99r]

I am doubting it as well. I looked at an exhaust off an 850 and I know it would not as the exhaust ports seemed further apart.

[Guest]

The 83 is a sixteen valve and two carb model.

[car99r]

Hey guys, what about the "E" model? I found a nice exhaust off an 80 GS550E and besides being black looks the same.

[Guest]

That header will fit but the cans might be a different length.
Part numbers for the headers are the same but the cans are different.
Worth a shot if you can fabricate a bracket?

[car99r]

That header will fit but the cans might be a different length.
Part numbers for the headers are the same but the cans are different.
Worth a shot if you can fabricate a bracket?

I think Iwill go for it. I guess if they don't fit i can just resell...haha

Thanks for all of the information guys! Once I get the carbs cleaned up I am sure I will have a few more questions when it comes to tuning... Lots of reading to do.