Does anyone know if any other pipe other than the V&H fits the 1150? Maybe something from a GSXR? Is anyone other than V&H making a pipe that will fit?
-
-
Ask Jim (posplayr) He seems to be the pipe guru of late.
-
I PMed Bruce
about the supertrap and such already
.
PosplayrComment
-
Thanks, Jim for the heads-up on that pipe. But it has a dent in the bottom of it. If I get one, as anal as I am, it would need to be in excellent or new condition. I would probably have it ceramic coated to closely match the color of the stock pipes. I'm considering doing pods, pipe and jet kit on my all stock 1150 and was trying to find out if there is anything available out there. And I'm not sure, but I think the 1150 port spacing is different from the 1100...but I could be wrong.Comment
-
I have a buddy that says he can make me a pipe out of stainless. I might go that route, but it will be expensive even at a reduced price. He does amazing stainless work.Comment
-
GS1150 Pipe on GS1100ED
Bruce,
Here is a period GS1150 Yoshi pipe mounted to my 83 GS1100ED; no modifications. A little tight underneith (pushes against the oil pan) and I will have to:
remove the can
cut about 4 inches from the end
cut of and reweld the mounting tab
replace the can(re rivit in place)
Other than those modifications it looks like a better fit than GS1100E race header.
PosplayrComment
-
Hey Bruce, the port spacing is the same on the 1100 as the 1150 AND all the AIR cooled GSXRs. Ray.Comment
-
THERE'S the answer to all my questions. Thanks, Ray! I probably should have just called you, but perhaps this is useful to someone else, too.
Any recommendations? I'd like to maybe get a little more out of her, but want it to be reversable....just pods, pipe, jet kit, and maybe some mild cams and a Dyna 2000.Comment
Comment