OK....What's the trick for this leak?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Newbee

    #1

    OK....What's the trick for this leak?

    80 GS1100L. Leaks from the left engine side cover(stator) been through 3 gaskets, silicone etc. Seems to be coming out the cover screw holes? I even silicone the bolt threads.

    Leak isn't noticeable when running but after shutdown and sits for awhile I have about a quarter size oil spot.
  • Guest

    #2
    did you check for gouges in the cover? mine was leaking and i found that there was still a small piece of the old gasket left and it caused it to leak?

    Comment

    • Nessism
      Forum LongTimer
      GSResource Superstar
      Past Site Supporter
      Super Site Supporter
      • Mar 2006
      • 35789
      • Torrance, CA

      #3
      My 850 had a leak I thought was from the stator cover but it was actually from one of the crankcase screws. Was able to eliminate the leak by installing a copper washer on the screw. Not sure if your bike is similar, but something to consider.
      Ed

      To measure is to know.

      Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

      Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

      Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

      KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

      Comment

      • Newbee

        #4
        keep on lookin..

        I am going and try to pinpoint it this week..completely dry/degrease run for about 10 minutes and then check for oil leak

        Comment

        • Guest

          #5
          Probably a cam chain tensioner leak and it's coming from the starter cavity.
          Ask bwringer about the mystery hole.

          Comment

          • Newbee

            #6
            Oh...?

            I will pull off the starter cover and check...good idea? IF that's it how much work to change the gasket or whatever on the tensioner?

            Comment

            • Don-lo

              #7
              Oil will often also come out the grommet around the stator wires, then out the mystery hole. Clean the grommet and black permatex it from both ends.

              Comment

              • kyscootertrash

                #8
                Stator Cover Leak

                Had a Kawi with a similar problem. I got everything clean, and found a hairline crack next to one of the bolts. You could only see it when the cover was torqued down. With the cover off the bike, everthing looked perfect.

                Comment

                • martyman

                  #9
                  Oil will often also come out the grommet around the stator wires, then out the mystery hole. Clean the grommet and black permatex it from both ends.
                  A little bit of searching and found out why I have this leak. This site is fantastic...

                  Comment

                  Working...