fuel cock exploded diagram

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • buckeyemike
    #1

    fuel cock exploded diagram

    I know this has been asked a few times over the years but I could not find an actual diagram to show an exploded view in all past posts. Went to bike bandit and did not find one their either, tried more than one model at bike bandit and still no success. anyone know where I can find an exploded view of petcock. yes I checked my chilton and factory manuals. thanks if anyone can come up with it. its a 82 850l
    Tags: petcock exploded
    • Guest
      #2
      go to alphasports old mate.Cheers,Simon.

        Comment

        • TheCafeKid
          #3
          Originally posted by buckeyemike
          I know this has been asked a few times over the years but I could not find an actual diagram to show an exploded view in all past posts. Went to bike bandit and did not find one their either, tried more than one model at bike bandit and still no success. anyone know where I can find an exploded view of petcock. yes I checked my chilton and factory manuals. thanks if anyone can come up with it. its a 82 850l
          Your WHAT exploded??!!?? Man, you better get that looked at bro!

            Comment

            • buckeyemike
              #4
              alpha sports

              no go there. had a decent. view of 81 and earlier. 82+ design slightly diff and did not have an expanded???

                Comment

                • Nessism
                  Forum LongTimer
                  GSResource Superstar
                  Past Site Supporter
                  Super Site Supporter
                  • Mar 2006
                  • 35788
                  • Torrance, CA
                  #5
                  There are only a handful of parts. What is the issue?

                  I took apart an '82 850 petcock a few months ago and did some work on it. Lever was very hard to turn so I smoothed out the tapered plastic barrel on the inside of the petcock using fine sandpaper. Works perfectly now...and the brand new petcock I bought just in case is still sitting in the box.
                  Ed

                  To measure is to know.

                  Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                  Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                  Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                  KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                    Comment

                    • TheCafeKid
                      #6
                      Originally posted by Nessism
                      There are only a handful of parts. What is the issue?

                      I took apart an '82 850 petcock a few months ago and did some work on it. Lever was very hard to turn so I smoothed out the tapered plastic barrel on the inside of the petcock using fine sandpaper. Works perfectly now...and the brand new petcock I bought just in case is still sitting in the box.
                      I took apart a 550 petcock not long ago trying to see if i could get it working, only to find that there was no apparent reason it DIDNT work. Liquid flowed thru it when it was off the tank, but it simply wouldnt work when attached. Knowing that rebuilds are a crap shoot, i simply ordered a new one....

                        Comment

                        • Guest
                          #7
                          try download a manual from bikecliff website and see if theres anything there

                          my suzuki and haynes both have diagrams but i have no scanner, sorry

                          what is the issue though? if it's not working just buy a new one, old ones can rarely be fixed

                            Comment

                            Previous template Next
                            Working...