I got it to work.
-
-
You will need both manuals for both years then start macthing each wire to its corresponding function. Go to basscliffs website from the mainpage and you can download them for free. -
Trace each wire circuit and match them up one at a time. It you don't know how to do this, I suggest you just search out a 1980 gauge cluster which will be a direct plug in.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
Where are you located? Maybe a member near you can come over and help you out.Comment
-
Eric,
Your files show up as the red-x boxes.
But I have both schematics in a manaul here, so can look at that for you sometime in next couple days.
But I do not fully understand where it is you say the PO cut your wiring. You said "Main harrnes" and you said "from the guages". Are you saying that even if you had a stock guage set correct for your 80 GS850G complete with the correct connectors, that even then your wiring on the bike is missing the connectors?
Plenty of folks here willing to help.
Where you in general are you located? Maybe there might be a rally near you sometime.
.Bikes
Had 650G & 850G. GK since 2005. BOTM 850G 6/2024 , GK 9/2015Comment
-
That got me thinking of the pile of parts I used to have for 850G. Yep, have this one remaining that I kept for seemingly no good reason...
How about this
.Bikes
Had 650G & 850G. GK since 2005. BOTM 850G 6/2024 , GK 9/2015Comment
Comment