79 GS 1000 Rear Swing Arm Length

[Mr.Ed]

Hi Guys,

Like the title states, I am looking for the length of the stock swing arm from the pivot point on the main frame to the rear of the axle adjusters for a chain driven 79 GS 1000. Not sure if there is a difference between models or not. I cut mine up to help fab a hardtail frame without getting that measurement first. Any help would be greatly appreciated.

Thanks!

[Mr.Ed]

bump, would appreciate anyone measuring their stock swing arm...

[Guest]

I measure 22.5 inches from the center of the pivot to the bitter end.

By the way, if anyone needs a stock 1978 GS1000 swingarm, I've got two in good shape I'd be happy to part with for the cost of shipping.

[Suzuki mad]

If you making a hard tail surely the length of the swing arm won't make that much of diference?

A longer swingarm will help with the stability.

Suzuki mad.

[Mr.Ed]

Thanks jskellington for the 22.5" measurement.

Suzuki mad gonna use that measurement to figure out the original rake and trail and probably strech the rear section by 3 to 4 ".

Thanks for everyones help!