What blows fuses?

[80GS1000]

I believe the brown is for running lights as the kats don't have them with stock signals but can be done with three lead signals and the brown wire.

I also believe the brown wire is on the same fuse as the one I am using. I will try a diff switch wire and if not it will be time for a relay.

Chef... I will check out your diags thanks.

The unattached brown wire with the female bullet also a switched wire that'll work for your purpose. If you want to do it the hard way...

[Guest]

I am going to start with the wire.

[SqDancerLynn1]

When you rev it, it blows ? Check the charging circuit, make sure your not feeding your bike 18-20 volts

[Guest]

I have ruled out the charging system. The stock instruments don't blow any fuses. So it is the new digi clocks wiring.

I have spliced the digi into a stock female plug so it plugs into the harness. I may have done something there, or, there are three wires not used by the new clocks. I isolated them and taped them into the bundle so they are not grounding to anything.