anyone put a cooler on one of those beasts?
-
-
The oil cooler set up is basically the same for all the 8V engines – plain bearing 650 excluded. I built an adaptor and installed an Earl’s cooler on my 850. What kind of information are you interested in?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
I have only worked with the 16v engines which have the oil galleries for the coolers. I guess these motors are like the 750s and need the filter cover drilled and modified for oil lines?
I dude asked me if he could install a cooler on his bike and I said I would look into it.Comment
-
It’s easier to just purchase an adaptor, or make one from scratch, as opposed to trying to modify the stock oil pressure sensor cover. Trust me, I tried.
BassCliff has a tutorial sheet I put together on how to make your own adaptor. If you don’t want to go though the exercise, there is a guy named Terry (from Oz) that sells prebuilt adaptors for about $100 USD. Search the archives here for lots more info on the subject or drop me a PM if I can be of any help.
Good luck.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
Yeh, know about Terry.
Don't want to run the lines back behind the engine. Looking for the route from the filter cover.Comment
-
I don't think it can be done. Even Yoshimura from back in the day picked up the oil from the main galley feed under the oil pressure switch.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
That cooler is for a 16V engine.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
Check PM Rob.Comment
-
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
IC. Haven't had an 8v apartComment
Comment