HELP PLEASE! Bike Cranks but wont Start.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Nessism
    Forum LongTimer
    GSResource Superstar
    Past Site Supporter
    Super Site Supporter
    • Mar 2006
    • 35789
    • Torrance, CA

    #16
    Originally posted by smoothbomber23
    I figured out the problem. It was something dumb! The breather hose that goes from the head to the airbox was disconnected from the airbox. I guess this happened when i slid the airbox back to remove the carbs.
    THANK YOU
    -Thomas

    Glad your bike is running better Thomas but the problem was not the breather - only issue that will cause is fogging some oil and blow by gases on the ground.

    Fingers crossed that the bike keeps running well.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment

    • Guest

      #17
      The float bowls finally primed themselves.

      Comment

      • thatbikerguy

        #18
        When he said that he was new to motorcycles in general... I was gonna suggest turning the petcock to the on position.

        Been there before...

        Comment

        • smoothbomber23

          #19
          The bowls were primed for sure because i undid the drain plugs on the bottom and got gas everywhere, (and yes reprimed them after they became empty) but also the engine was totally flooded so i think letting it sit had something to do with it also!!!!! Thanks Again Guys.

          -Thomas

          Comment

          Working...