I have a 79 gs1000 and have put a gs1100 motor in it.fits.Has anyone tried to put a 1150 motor into a gs1000?.I have access to a 1150 motor.How many motor parts are interchaneable between a 1100 and 1150?
-
-
If you are talking about replacing an 8 valve motor for a 16 valve version it may be tougher than you think, and if we are looking at shaft versus chain drive it may be neigh impossible.
Give us a little more detail about what you have1981 GS650G , all the bike you need
1980 GS1000G Power corrupts, and absolute power corrupts absolutely -
The 16 valve 1100 & 1150 are the same motor mounts. Ray.Comment
-
It should be possible to put 1150 cylinders on a 1100 lower end. If I was going that route I would go for a big bore kit and make a real difference. 50 CC is not a large change by itself.1981 GS650G , all the bike you need
1980 GS1000G Power corrupts, and absolute power corrupts absolutelyComment
-
The CYLINDER head is the biggest advantage with the 1150 over the 1100 as the 1150 head has bigger valves & more airflow. Ray.Comment
Comment