What is the best way to remove theses jet screws?
carburetor SNAFU!
Collapse
X
-
steve vu
carburetor SNAFU!
Tried to replace air-ject on carburetors today (82 GS650L), the airjet screw got stuck. I used a screw remover, 2 of the barrels are cracked. Now,I need to buy 2 carburetors.
What is the best way to remove theses jet screws?Tags: None -
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
Guest
Pilot air jets. I use a little heat from a torch. Then they come right out with a tight fitting screwdriver.Comment
-
steve vu -
Guest
Comment
-
The air jets don't even need to be removed. Just leave them in place and drop the carb body in the dip.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
Comment