Rubber fuel sleeves and Tee between Carbs

[Tim]

I have a 79 GS850GN, I believe I need to replace the fuel Tee between Carb #2 and #3 and the rubber fuel sleeves between Carb (#1 and #2) and (#3 and #4). These are part numbers 718607-001 & 718608-001 on BikeBandit.com. They don't have O'Rings they have ridges in the rubber sleeves themselves. These are discontinued parts any suggestions how I can get or fabricate replacements ????????

Thanks in advance.

My stable.........
1979 GS850G
2006 ST1300
1995 Z28 ( yeah I know not a bike but it's still one of my babies)

[Nessism]

Easy job if you have a lathe, or know a machinist.

The photo shows a homemade Tee for my old '79 550

Failing that, you can purchase Tee's and joining tubes here (not cheap)... http://www.motorcyclecarbs.com/OEM_Fuel_Tees_C1558.cfm

[Tim]

What about the tubes between carbs (#1 and #2) and (#3 and #4) ???

Thanks for the link for the Tee. I don't have a lathe for a friend whose a mechinist.

[Tim]

Ok , I looked at the website and I see the Fuel pipes on there also. Sorry I didn't look at the website before asking about those. Thanks Nessism. Much appreciated !!!

[chuckycheese]

Tee

I think I remember seeing those fuel tees on Z-1s website listed for the old Kawasakis....(I think it would be exactly the same thing.)