35mm Wipers

[Old Colt]

When I made up my fork brace for the GS1000 forks I used these wipers from a 1983GS550ES. These are for 37mm forks.
My question is I want to find this style wiper for the 35mm forks, any of you gents know which bikes use the internal mounting wipers in this size?

[reddirtrider]

I have a set that I ordered through Ebay. I'm not going to use them as I want the type that goes over the fork and have a pair of them on order through Bike Bandit. Send me a PM and we can work something out cheap.

My 1983 GS750ES has the 37mm forks.

[Old Colt]

At this time I am trying to find some for the 35mm forks though.

[reddirtrider]

At this time I am trying to find some for the 35mm forks though.

Apparently I don't read so good.

Check Ebay, it appears some of the folks there deal with the internal wipers. Probably because they are cheaper.

[Old Colt]

I just need to find what bikes they came on first. I am only familiar with the external style on the smaller forks.

[Hammered]

I have a set of 35 mm fork cap/wipers. I think Im understanding the part you need correctly. I used a set of gaiters instead of the fork cap/wiper. As long as we're talking about the same part


I can do you these for $10 plus the shipping.

[Old Colt]

Those are the original style as used on the early GS, I want to replace them with the later style that inserted inside the lower tube that has been in use on the 37mm and larger forks from 83 to now.

I originally had a fork brace that clamped over those boots. Those braces are all but useless. I now use a brace that clamps to the tube and this tightens the front end right up. I now am going to make a similar brace for the 35mm fork.

[sschering]

try a 79-81 Honda CB650 dust wiper..

[Old Colt]

Ahh yes, those will be perfect, same seal as the GS too.
Many thanks
My little T20 Hustler with shortened GS forks will be more happy now.