so i found that the gasoline was somehow mixed with the oil and i drained it and changed the oil filter it runs fine now BUT the starter something or whatever that produces the spark is irregular and i have a hard time starting it because of it. is there another way to start the bike or do i just need to replace the part?
-
-
Hi,
Have you looked at the spark?
A faulty petcock combined with faulty float needle seal will cause gas to get into your oil. Have you addressed those issues yet? In other words, a new petcock and a complete carb clean and rebuild.
Thank you for your indulgence,
BassCliff -
Listen to Cliff, he is a wise man. Also, sounds like you need new plugs.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
well my friends it seems the igniter has gone kaput on me and must be replaced
also plugs are brand new.. petcock was fine
again i thank you for your help and wisdomLast edited by Guest; 04-17-2009, 05:40 PM.Comment
-
Dyna S kit is about $120 at Z1 Enterprises. I don't think they list your model on the application chart but a few members around here have fit them. Doing a search should uncover some pertinent information.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
found one for $150 and its on the way..after i put it in my bike will finally be up and running for the first timeComment
Comment