5/16 to 1/4 fuel line?

[Anonymous]

have 5/16 on my 78 750 now, i found a universial fuel valve that is 1/4 outlet, think this will flow to little gas? for the price of this new valve i hope it works...what size lines are y`all running?

[Anonymous]

Re: 5/16 to 1/4 fuel line?

have 5/16 on my 78 750 now, i found a universial fuel valve that is 1/4 outlet, think this will flow to little gas? for the price of this new valve i hope it works...what size lines are y`all running?

I think i have 3/16 on my bike
ill hve to go and look tomorrow

[focus frenzy]

the 1/4 inch line may be ok on a early 750 but it could be close.

[Anonymous]

i have one of those auto style glass fuel filters, with the 5/16 line it keeps the filter a little under halfway full. this is the link to the new petcock. http://www.650motorcycles.com/Petcock.html

[SqDancerLynn1]

1/4 is too small use 5/16 hose

[KEITH KRAUSE]

Measure the inside diameter of the tank outlet or the carb inlet. The hose should be the same size or can be a bit larger with proper clamping. Don't put on a hose that has a smaller inside diameter.