Announcement
Collapse
No announcement yet.
Help Identify This Seat
Collapse
X
-
seuadr
well, i met with gary today, and we compared seats. it's very similar to the 1100g seat. however, the seat lugs in the front are slightly ( about a half inch ) lower than the 1100, and the seat pan in the back doesn't dip as far as the 1100, which seems to dip an additional half inch or so.
it may well be a 650 seat, i suspect it could be fitted to an 1100 if you swapped set lugs.
i am pretty sure the seat cover would easily fit the 1100 sat too.
i'm gonna talk to the boss about buying it for the seat cover
Comment
-
Don-lo
My guess is that it will be too small. If you do attempt it, please be careful. My friend with the 650G would want to buy it if it doesn't fit.Originally posted by seuadr View Posti am pretty sure the seat cover would easily fit the 1100 sat too.
i'm gonna talk to the boss about buying it for the seat cover
Comment
-
HammerHead
Hey BikerG, It would fit perfect on my 82 GS850G...........except for the price.....dam
If you can find a part number, I'll look it up forya.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 36197
- Torrance, CA
Since when does a 650 seat fit on a 850?Originally posted by HammerHead View PostHey BikerG, It would fit perfect on my 82 GS850G...........except for the price.....dam
If you can find a part number, I'll look it up forya.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
seuadr
we compared the seats side to side, with the exception of the two noted difference, they are pound for pound the same. even the same shape. grab bars lined up perfectly, rubber stops were perfect, just his seat doesn't have quite as much of a dip for the rear wheel, and the pins for the front mount are closer to the seat and spaced slightly farther apart.Originally posted by Don-lo View PostMy guess is that it will be too small. If you do attempt it, please be careful. My friend with the 650G would want to buy it if it doesn't fit.
Comment
-
Don-lo -
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 36197
- Torrance, CA
Well, dude got $102.50 for the seat. Same as suggested here...only he didn't believe us and was greedy. Of course, if he sold here he might have received push back on the $35 shipping cost (about double of actual).Originally posted by rustybronco View Post
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
.png)
Comment