I missed the point of teh 1st post completely
I did not spent the time to analyze every inference in the original post and really had no idea the question was as simple as
" can I swap the high tension wires on OEM coils".
Gee whiz wam bam thank you Mame. This would have been a 1 response one word thread.
Instead we are getting weather reports from NYC like that has anything to do with wire fit. Don't even know what bike or if they are even OEM coils.
Sorry if you don't have time to ask a refined question Jebus23, how do you expect to get a quick answer.
You can already see that there are 6 different topics brought up by 8 different posters (I prone to exaggerate
).
Entropy is a natural and pervasive phenomenon, we have to work a little to get order
Pos
I did not spent the time to analyze every inference in the original post and really had no idea the question was as simple as
" can I swap the high tension wires on OEM coils".
Gee whiz wam bam thank you Mame. This would have been a 1 response one word thread.
Instead we are getting weather reports from NYC like that has anything to do with wire fit. Don't even know what bike or if they are even OEM coils.
Sorry if you don't have time to ask a refined question Jebus23, how do you expect to get a quick answer.
You can already see that there are 6 different topics brought up by 8 different posters (I prone to exaggerate
).Entropy is a natural and pervasive phenomenon, we have to work a little to get order
Pos
, . You have to understand some of the frustration of the respondents here. There is another thread going on right now where the person asking the question did not even look at the link I provided which is the answer to the question being asked. So what to DO??? 
.png)
) and you'll usually get some accurate guidance.....and don't even venture into the Off-Topic forum, otherwise you may enter a virtual, endless grumpiness world with lots of lectures!
Comment