Need Help sizing a Fork brace does this look right
Collapse
X
-
cromwell1234
Need Help sizing a Fork brace does this look right
Wondering if the following dimensions for a fork brace will fit my 1982 GS1100E, the fork brace hole diameter is about 61mm (2.387") and the center-to-center hole spacing is 185mm (about 6.215"). Thanks-- JDTags: None -
Guest -
cromwell1234
YES, I would measure mine but its about 50 miles away, at this time--good thing its raining--thanks CHEFComment
-
Guest
Center to center is 7 3/10 inches
The fork diameter is around 2 1/4 to 2 1/2 (adjustable)
Doesn't seem to be wide enoughComment
-
cromwell1234
Comment