Replacing my chain?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ryonker

    #1

    Replacing my chain?

    As I have been working on my 78 750, I noticed that the chain really seems to have a lot of horizontal play in the links. There is plenty of room to tighten it, but there is also a BIG difference in spots on the chain as far as tightness. When I adjust the "tight spot" to spec, the looser spots feel really loose. It is clearly the original 630 chain and sprockets.

    I am guessing it is time for a new chain. What do the chain experts think ?

    Thanks!

    Rick
  • Guest

    #2
    Worn sprockets as well. Replace them all as a set...

    Comment

    • Nessism
      Forum LongTimer
      GSResource Superstar
      Past Site Supporter
      Super Site Supporter
      • Mar 2006
      • 35788
      • Torrance, CA

      #3
      Yup, time for a new chain. Most people move to a 530 since they are lighter, cheaper, and should even improve durability since they have more rollers to carry the load.
      Ed

      To measure is to know.

      Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

      Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

      Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

      KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

      Comment

      • Larry D
        Forum Sage
        Past Site Supporter
        • Jul 2008
        • 4926
        • Indianapolis,IN

        #4
        I always recommend folks to call Jeff at Z1 Enterprises when it comes to chains/sprockets.

        He's very helpful and knowledgable. And also a member here !!

        Z1 Enterprises specializes in quality Motorcycle parts for Honda, Kawasaki, Suzuki and Yamaha Classic Japanese motorcycles from the 1970's and 1980's.
        Larry D
        1980 GS450S
        1981 GS450S
        2003 Heritage Softtail

        Comment

        • ryonker

          #5
          Thanks for the replies!!!!!!!!!!!!!!!!

          Rick

          Comment

          Working...