Stripped oil drain-Help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Steve
    GS Whisperer
    • Jun 2005
    • 35925
    • southwest oHIo

    #16
    OK, before anybody else calls me out on it, I have to admit ...

    I made a mistake.



    I just came back from Auto Zone and realized that the plug I had gotten for a bike was, indeed, a 1.5 pitch, not the 1.25 I had mentioned earlier.

    Mainfr4me, go ahead and use that 14 x 1.5 OS that you got, it will work just fine.
    Just grease it up like everyone suggests, then take it out and clean it off before you install it with a gasket and fill the oil.

    .
    sigpic
    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
    #2 son: 1980 GS1000G
    Family Portrait
    Siblings and Spouses
    Mom's first ride
    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
    (Click on my username in the upper-left corner for e-mail info.)

    Comment

    • Guest

      #17
      Takes a man to admit it.

      Comment

      • mainfr4me

        #18
        Oh well, I've been far wronger (yea, not sure if that's even a word) in the past. And most likely will be in the future.

        Comment

        Working...