first time stator rewind WORKS GREAT!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • propflux01

    #31
    Originally posted by posplayr
    Oil can migrate out past that rubber grommet out past the o-ring on the starter shaft and leak out. Sealing that oil loss path can stop mysterious oil leaks. Be careful about getting RTV loose in the engine but apply liberally.
    Yes, but when your grommet is completely soft and gooey, and cannot be reused, what do you use in its place?

    Comment

    • posplayr
      Forum LongTimer
      GSResource Superstar
      Past Site Supporter
      • Dec 2007
      • 23673
      • Tucson Az

      #32
      Originally posted by propflux01
      Yes, but when your grommet is completely soft and gooey, and cannot be reused, what do you use in its place?
      I would buy a new one.

      Comment

      • jknappsax
        Forum Sage
        Past Site Supporter
        • Jul 2003
        • 1108
        • Philadelphia, PA

        #33
        1N4001 diodes are pretty low-current, generic diodes.
        1979 GS 1000

        Comment

        • propflux01

          #34
          Originally posted by posplayr
          I would buy a new one.
          Thats the problem, they are not listed on my parts fiche breakdown.

          Comment

          • posplayr
            Forum LongTimer
            GSResource Superstar
            Past Site Supporter
            • Dec 2007
            • 23673
            • Tucson Az

            #35
            Originally posted by propflux01
            Thats the problem, they are not listed on my parts fiche breakdown.
            Parts wanted section.

            Comment

            Working...