Kawasaki KZ1000 KZ900 Z1

**TheCafeKid** · 06-19-2009, 01:24 AM

Hands off!!! Lest ye want to get into a bidding war!! Yar!! Avast ye...Ive been watching those...Actually, you wait...bout 11 or 12 more hours and those are going to shoot up about 2-300 bucks in price...

**SqDancerLynn1** · 06-19-2009, 01:33 AM

No bids yet

**TheCafeKid** · 06-19-2009, 01:41 AM

Yet, Im all over em like white on rice tho... As long as they dont go over bout 200 bucks...I have a sweet arse GS750 with a 850 piston and jugs that these will be perfect for...

**crapwacker** · 06-19-2009, 01:44 AM

SOOOO, might these be the the beast in hiding? No fear, would probably DROWN my 750!

**crapwacker** · 06-19-2009, 01:57 AM

http://cgi.ebay.com/ebaymotors/Mikuni-29MM-Smoothbore-Carburetors-Carbs-KZ1000-Z1-CB_W0QQitemZ290324333379QQcmdZViewItemQQptZMotorcy cles_Parts_Accessories?hash=item4398adc343&_trksid =p4506.c0.m245&_trkparms=65%3A12|39%3A1|72%3A1171| 240%3A1318

Seems like our darlings will be going even higher

**wkmpt** · 06-19-2009, 01:58 AM

Originally posted by TheCafeKid

...I have a sweet arse GS750 with a 850 piston and jugs that these will be perfect for...

Ah, so that's why you haven't gotten back to me about my carbs...
<wink>
Good luck, hope one of you chaps scores those beauts. They look nice.

**feelergaugephil** · 06-19-2009, 01:58 AM

Originally posted by TheCafeKid

Yet, Im all over em like white on rice tho... As long as they dont go over bout 200 bucks...I have a sweet arse GS750 with a 850 piston and jugs that these will be perfect for...

Ha! I'm gonna bid $201.02 lololololololol

**TheCafeKid** · 06-19-2009, 02:01 AM

then so be it sir! lol I have a budget when i stalk these things..If its something I REALLY REALLY NEED, i might break it. But if its just something that I want, I stick to it. Or otherwise, id be in the poor-er house...lol

**TheCafeKid** · 06-19-2009, 02:03 AM

Originally posted by wkmpt

Ah, so that's why you haven't gotten back to me about my carbs...
<wink>
Good luck, hope one of you chaps scores those beauts. They look nice.

ACtually, its PART of the reason. Ive been asking around and trying to find a set that match yours...the trick is I DONT KNOW what yours are..26mm inlet, but I have never heard of a 26mm pumper carb so i dunno if they're a different model, or if they'll work on a 750cc or 850cc bike...If i find out more, I will take em for sure...but so far, your carbs are a mystery to everyone ive asked.. might be worth a fortune tho, so dont go sellin em off just yet!

**feelergaugephil** · 06-19-2009, 02:12 AM

Hey, if you really want it so so bad, go to www.esnipe.com and join for $20 which includes bid points! That's what I do, but keep it a secret! ooooooops!

**Nessism** · 06-19-2009, 09:00 AM

$200+ ? You sure? Seems a bit high doesn't it?

**Larry D** · 06-19-2009, 09:11 AM

Alright.....I've been here for awhile now. I know these are prized carbs.

Why ? Do they move more gas or something ? More efficient ? Racing carbs ?

What makes these so special ?

**Baatfam** · 06-19-2009, 09:17 AM

Originally posted by feelergaugephil

Hey, if you really want it so so bad, go to www.esnipe.com and join for $20 which includes bid points! That's what I do, but keep it a secret! ooooooops!

Shhhhhhhh.........

I thought I was the only one that used esnipe....

**Dan Ruddock** · 06-19-2009, 10:32 AM

Originally posted by crapwacker

Hey, anyone mount these to a gs of any sort? Seem to be pumpers. Oh, here's some on sleezbay

I have a set of those on my bike. There is no fuel mixture screw (only air screws) like the GS carbs have. It's more difficult to get a accurate idle mixture but other than that I like them. Dan

Kawasaki KZ1000 KZ900 Z1

Kawasaki KZ1000 KZ900 Z1

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment