Whats a fair price for a titled bare frame????

[redsoxvw]

Just curious on what you guys think is a fair price for a titled Gs750 bare frame......I mean bare no nothing frame only.........

[SqDancerLynn1]

max $100 for bare frame

[almarconi]

I guess it depends on the availability but $100-$150 with a clear title would be reasonable. No luck straightening yours?

[redsoxvw]

I guess it depends on the availability but $100-$150 with a clear title would be reasonable. No luck straightening yours?

Aghhh....its as good as its gonna get .....It rides straight....the bent forks were the wost part, after a good set from Chef.....It rides straight....I can take my hands off the bars and she dont veer off to either side. Nice and straight..........

But I Figure Im stock piling all these parts for this project, I mine as well spend a few bucks and get a unmolested frame............

[posplayr]

get an unmolested parts bike; it is even cheaper

[bmac]

Parts bike

Most parts bikes have been molested and violated. You can look at it two ways. One, a bare frame is a good way to go. Lite and easy to transport. You can clean it and spray it, transfer parts and your done. Buying a parts bike leaves you to get rid of the remains or store the clutter. I personally would by the frame and restore done deal. Bmac

[duaneage]

Typically they get 50 + shipping for a frame on ebay, but now ebay required titled frames to be listed as a vehicle complete with their ridiculous fees for doing so. I had a frame pulled from the good old bay because I didn't go through their vehicle listing. That might have changed recently but I'm not sure.

Obviously the type and year matters. A rare Katana frame is going to fetch more than most of the L frames, all things considered. The one frame I managed to sell on ebay before the policy change I repainted it and still got 50 dollars for it, not worth the trouble. It was 650G frame.

[Hammered]

I have a 1982 GS750 frame untouched. Most in this area go for about $75 with bill of sale and $100+ if titled. Shipping these days is a complete other nightmare.

Dont waste your time on Fleabay for a couple days. Only thing listed are 1 GS750 swingarm listed a SG750 and a GS550 frame, but its an '05 and going for $400.

[80GS750]

i have sold all mine in the past for around $100 shipped..with the title

[redsoxvw]

i have sold all mine in the past for around $100 shipped..with the title

Got an extra LOL

[TheCafeKid]

I have a 1982 GS750 frame untouched. Most in this area go for about $75 with bill of sale and $100+ if titled. Shipping these days is a complete other nightmare.

Dont waste your time on Fleabay for a couple days. Only thing listed are 1 GS750 swingarm listed a SG750 and a GS550 frame, but its an '05 and going for $400.

I was just on ebay...there are like 9487509485084509 things listed for GS750s...

[redsoxvw]

I was just on ebay...there are like 9487509485084509 things listed for GS750s...

I think you might be one or two off but pretty close LOL......

[Hammered]

I was just on ebay...there are like 9487509485084509 things listed for GS750s...

Not for frames.

[TheCafeKid]

Ive got a titled 79 "L" frame I will sell ya if ya want it. You'd have to change the front tank mounts (cake) and i "think" thats it?? or maybe you have to swap sides with the seat hinges...They're otherwise the same..

[redsoxvw]

Ive got a titled 79 "L" frame I will sell ya if ya want it. You'd have to change the front tank mounts (cake) and i "think" thats it?? or maybe you have to swap sides with the seat hinges...They're otherwise the same..

So this would except my 16v transplant no problem????......Thats my main concern.....everything else is no big deal....as I will be slicing,dicing, mixing, matching, machining....etc....aghhh you know LOL........

Pm me with a price when you get a chance.....Im trying to do this as wallet and wife friendly as I can LOL (shes gonna have a fit, I get out of drag racing cars for a couple years now Im diving in head first with this )