head interchangeability

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Spyderman

    #1

    head interchangeability

    can i use a 1980 Suzuki GS 1000 G head on my 1978 GS1000
    are the intake boots interchangeable and so on and what are the differences between them ??
    also is there anyone here that can port and polish it if i send it to them
  • KiwiGS

    #2
    I know the chain drive 1980 head will have bigger intake ports, not sure about the shaftie though.
    Dont think the boots will swap.
    If you have the 1980 carbs it might work.
    Sorry I think the postage might be a killer for me to clean the head up for you.
    Cheers

    Comment

    • TheCafeKid

      #3
      The 80 head will use CV carbs, yours will not. Im not even sure they are the same part number, tho I DO know that they both used the same head in 80 and on.

      Comment

      • Nessism
        Forum LongTimer
        GSResource Superstar
        Past Site Supporter
        Super Site Supporter
        • Mar 2006
        • 35788
        • Torrance, CA

        #4
        The head will bolt up, but as mentioned the intake system is different. My 1000 has a G head.


        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment

        • Guest

          #5
          THAT'S the beat 1000? Nice work Ed.

          Comment

          • Spyderman

            #6
            so if the intake is different then i won't be able to use my smoothies and that makes it a no go for me
            thanks for the info gents

            Comment

            Working...