running better, monometer is cool tool, but now

[crapwacker]

it just fell off. Honest. Shiesten

[TheCafeKid]

You know where to come I happen to have a set. YOUR dash is nicer, but the gauges will interchange...BTW, how'd that needle movement do ya??

[crapwacker]

I think pretty well. I have a little carb pop, and manometer told me which carb #4. Cool. working on that. It is a little fumbley at 4g steady throttle, maybe >1/4 throttle, so I held it there and tried a plug chop at that position. #4 looks rich.

[TheCafeKid]

Yanno i was gonna say that i think i turned that air screw PRETTY far before it made a difference... You might notch that pilot fuel screw down a touch..or count how many turns out you are on the air screw and get back to me.

[crapwacker]

well I did back the fuel screw out 1/4 turn. I'll check her out tomorrow. It's nice to be able to make right turns, too! Thanks again

[TheCafeKid]

No prob. Like i said, if you need a replacement Speedo... give me a shout..its taking up space.

[DimitriT]

it just fell off. Honest. Shiesten

Have you spoken with a urologist?

Seriously, I would just live with that and consider it part of the character
of the bike.

[Guest]

You can open up that bad boy and replace the needle.

[crapwacker]

Where do I get said needle?

[Dogma]

Where do I get said needle?

I don't think I could resist the opportunity to customize. Go to a clock shop and get a fancy-looking set of hands. Paint one of 'em orange or blood red and find a way to fasten it on there!