Just a silly question I'm looking to replace my 750e engine and a used part dealer can get me an 1100 engine with low km's as I need a piston job on my gs. Does anyone know if the 1100 will fit in the gs750E frame.
-
-
Yes, it will fit - they call it a 7-11. I'm not sure what exactly needs to be done but I think you need the 1100 motor mounts or you need to fabricate some new mounting plates - not sure. I'm sure someone will come along with more details or do a search.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
Get the 1100 motor. It's a bolt in! Get the 1100 swingarm while you're at it. Ray.Comment
-
the center bottem triangle mounts dont match up..
either dont worry about them or make some offset triangles and drill them to match the new engine/frame combination.
there is a front uprights cross brace missing on the 750's that will cause problems if making decent horsepower...simply add a piece of tube where it is missing.
you will need to open up the swingarm pivot holes in the frame to add an 1100 unit..no biggie.Comment
-
Go to oldskoolsuzuki.info
Comment
Comment