1150 vs 750 exhaust gaskests

[UncleMike]

I was putting the exhaust back on the 1150, and had some exhaust gaskets - the little rings you put in before the headers - laying around from my 750T that I'd ordered but never installed. Putting them up to one another, they are the same width and diameter as the old ones that were in the 1150.

That doesn't seem right, does it? The 1150 used to have a V&H 4-1 on it, and now I'm putting on an OEM.

What's the deal? Does the V&H take a smaller gasket, or do I blame the PO again?

/UM

[marvinsc]

I would think those gaskets are exactly the same Mike regardless of what exhaust is being used.

[UncleMike]

Even between the 750 and the 1150? Even though the exhaust diameters are different?

[UncleMike]

Part numbers are all the same...

Hmmmm.

[Baatfam]

Even between the 750 and the 1150? Even though the exhaust diameters are different?

Mike, I just checked the online drawings at partshark and the part numbers for exhaust gaskets on an '84 1150 and an '82 750E are the same...
So ya, probably all the 750s, 1100s and 1150s are the same...

[Baatfam]

Dang...got there first...

[UncleMike]

I'm quicker now that I'm riding the 1150 than I was with the 750.

[blowerbike]

same stuff.
i believe the 400 twin gaskets are the same also.