Air Intake

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Kitten Tooth

    #1

    Air Intake

    Does anybody know what the Diameter is of the snorkel boots on the air intake side of the carbs on a 1982 GS300L?

    I'm planning to replace the breather box with pods and i need to know the diameter of those boots that connect the breather box to the carbs.

    Thanks
  • tlepac

    #2
    Found a link for the factory repair manual. Pricey but would be invaluable in the long run I would think


    Terry
    WBL, MN

    Comment

    • Kitten Tooth

      #3
      Thanks Ill check it out

      Comment

      • mriddle

        #4
        I will try to get a measurement off the boots then weekend too.

        Comment

        • Kitten Tooth

          #5
          Cool, thanks man

          Comment

          • mriddle

            #6
            Best I could measure without pulling the box off, 50 mm on the airbox side of the carbs.

            I have an airbox for a GS250T that the inside diameter measured about 47.5 mm .. they share the same carb body as far as I know.

            Comment

            • Kitten Tooth

              #7
              Thanks man

              Comment

              Working...