CAM Chain Problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • estagor

    #16
    Pistons before I removed them

    Comment

    • estagor

      #17
      I have yet to do the measurements but the compression was down not sure... if a re bore is what I need

      Comment

      • blowerbike
        Forum Guru
        GSResource Superstar
        • Aug 2008
        • 7057
        • Ohio Closer to KY Than Cleveland

        #18
        you might want to check the condition of the conecting rods and bearings..
        the 80-82 GS750 was known for a bad oiling system and would spin rod bearings.

        Comment

        Working...