second starter claimed to be working that hasnet worked.

[nisom512]

I know there is power getting to the starter (I wired it up to the bike its self and it spun out side of the bike) but when I put it in, it makes a sound that to me sounds as if it doesnt have enought power to crank the engine. So as little as my braind thinks at night the only time I have to work on my bike all I did was check my fuses and replaced one that was still making a connection it just looked really crappy. So hope fully tonight I will be able to check all the connections and grounds and see what I can come up with. if I do have low voltage what can I do to get it higher?

Thank you
Jake

[blowerbike]

simple is best.
fully charged battery.
bike in neutral.
take a screwdriver and go across the 2 post on the solenoid.
if the bike cranks fine...
the problem is before the starter..

RUN FOREST RUN!

do what i posted above.
if it cranks the engine ok then the problem is before the starter.