Help me with float height adjustment

[Guest]

Post it up!

how did the chrome clean up? are you using the thermostat with it?

Sorry for the hijack
Yes I'm using the thermostat.
Chrome looks great!

[rustybronco]

Tompasio,
If your measured fuel level(s) is (are) at 5mm+/- 1.0mm, it doesn't matter what the float to gasket surface measurement is.

example... http://www.thegsresources.com/_forum...04&postcount=4

when I set the float levels to the recommended height of 23mm, it was almost impossible to get it running correctly. I set the fuel levels externally to 0 -/+ 1mm from the gasket surface, with clear tubing attached to the bowl drains and arrived at a 20.5mm float height.

my musings on the subject of fuel levels... http://www.thegsresources.com/_forum...69&postcount=3