@#%$ - Pilot Air Screw - GS1100ET

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ronin1166

    #1

    @#%$ - Pilot Air Screw - GS1100ET

    I was messing around with an old set of BS34SS carbs from a '80 GS1100.

    Pilot air screws were seriously frozen. With tender care I coaxed three free.
    No-go on #4, the head stripped out. So I verrrry carefully drilled it and removed it with a tiny easy-out.

    Sooooo,
    Does anyone have a donor GS1100ET carb set...with an intact pilot air screw?
    Or know where I can find one.
    Obviously not a dealer item...as it had an EPA anti-tamper seal plug over it!
  • Guest

    #2
    Try messaging Chef1366. he might have a pilot screw for you. or you could try blowerbike

    Comment

    • Guest

      #3
      I have some.
      I also have a complete set of rebuilt 34mm CVs that I'm selling.

      Comment

      • gearhead13

        #4
        Gee, sooo much trouble. Seeing as how you are so close, I could take that headache(engine) from you

        Comment

        Working...