1980 gs1000 factory jet sizes?

[jmlcolorado]

Hey guys,

Looking for the factory jet sizes for my 1980 GS 1000 G.

The specs are not in the sticky "factory carb specs"

Thanks a bunch.

Josh

[Nessism]

What does the service manual say? You can download the service manual for free from Basscliffs site in case you didn't know. http://members.dslextreme.com/users/bikecliff/

[jmlcolorado]

Thanks, that helps aa ton. Im going to assume the gs1000T has the same specs as the G model.
The 80 1000 service model is for 79 or older so different carbs. Although, the supplement manual shows the 1000 T specs which i think are correct.

[salty_monk]

115 mains, 40 pilot. 180 air jet.
needle is something like a 50dr. canadian models had same needle but with adjuster notches with 42 pilot & 160 air jet.

I have some of that stuff around if you're in need.

Dan

[jmlcolorado]

excelent!

That pilot was the one i was lookin for.

Im having a hard time getting this thing to idle right so i was going to pull my 42.5 pilots and reinstall stockers.

Im running different mains for my pods and my mid and full throttle are damn near there.

[BassCliff]

Hi,

There's a carb spec sticky at the top of the Tech Section. There's also a spreadsheet available with all of the numbers. I have a copy on my site in one of the carb sections.


Thank you for your indulgence,

BassCliff

[jmlcolorado]

I was looking on the Carb Sticky and the spreadsheet as well and the closest i could find was for an 81.

Maybe i didnt look hard enough.