Screws intake boots

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tompasio

    #16
    All 8 came out nice with a help of a little chisel and a hammer.Have now changed to new o-rings on the boots and stainless allen bolts.(Ordered by Bass-cliffs O-ring guy).Thanks for all help.The old o-rings was hard and flat and 2 of them where broken.

    Comment

    • Agemax
      Forum Guru
      • Apr 2008
      • 8371
      • plymouth uk

      #17
      Originally posted by Tompasio
      All 8 came out nice with a help of a little chisel and a hammer.Have now changed to new o-rings on the boots and stainless allen bolts.(Ordered by Bass-cliffs O-ring guy).Thanks for all help.The old o-rings was hard and flat and 2 of them where broken.
      i hope you fitted the new stainless bolts with anti sieze, or you will suffer more problems later
      1978 GS1085.

      Just remember, an opinion without 3.14 is just an onion!

      Comment

      • Tompasio

        #18
        I used copper paste.

        Comment

        Working...