help with starter relay!

[jakeolsen]

I don't know what I was thinking, but I disconnected my starter relay to inspect it, and now I can't remember how it is supposed to be connected back up!


I know that the wire with the rubber on the end goes to the back left stud. I also know that the yellow ended wire goes to the front right one. The other two I am not sure.

BTW - 1980 GS550e THANKS!!

[posplayr]

The two big leads go on the two large solenoid terminals. The solenoid control wire (green/yellow) already seems to be connected. The black and white wire with the ring lug is a ground that needs to go under one of the mounting bolts. Some one seems to have added an additional wire which I'm guessing is a ground (double check that with a volt meter).

As a GUESS: That looks like a single fuse box where the accessory ground is grounded (black wire with blue crimp ends) to one of the solenoid mounting bolts as well.

[jakeolsen]

Ok. I see what you are saying. That makes sense.

[posplayr]

Ok. I see what you are saying. That makes sense.

Double check that yellow wire is hot, and the black is a ground they seem to be of opposite sides of that fuse

[jakeolsen]

High Five! She started right up! Thanks so much!